Double glazing unit replacement cost: from €150 per window
Replacing a glazing unit with us starts at €150 per window, and the exact amount depends on the size and type of the unit and on access. When a new unit is enough, when the hardware needs work and when to replace the window.
Free site visit and quote
Leave your phone – we will call you

Replacing a glazing unit with us starts at €150 per window. The exact amount depends on the size and type of the unit and on access to the window, and it is in the written quote you get after the free site visit.
A new glazing unit is enough when the frame and the sash are sound and the problem is in the glass: misting between the panes, a crack, or wanting a warmer or quieter window. When the sash drops, rubs, does not lock or there is a draught along it, the cause is often the hardware – it is adjusted or parts of it are replaced, and the price is set after the site visit. The whole window is replaced when the frame is rotten or warped, the profile is very old, or you want a different sash layout or a different size of opening.
For comparison: on our price list, replacing a whole 2.00 × 1.50 m window comes to €1,339.45 – €1,111.29 for the new window with materials and fitting, and €228.16 for labour: removing the old one and finishing the reveals. The calculation is below.
In short: glazing unit, hardware or a new window
| What you see | Usual fix |
|---|---|
| Mist or droplets between the panes | new glazing unit |
| Cracked or broken glass | new glazing unit |
| You want a warmer or quieter window and the frame is sound | new glazing unit |
| The sash has dropped, rubs or does not lock | hardware adjustment |
| The handle is loose or sticks | tighten or new handle |
| A draught along the closed sash | adjustment, seals |
| A draught around the frame, damp reveals | check the joint |
| Rotten, cracked or warped frame | new window |
| A different sash layout or size of opening | new window |
Price: from €150 per window
The amount for your window depends on three things:
- Size – the unit is made to the measurements of your window, and a large unit is also heavier to carry and fit.
- Type – a double or triple unit, and what glass is in it: standard, low-e, laminated or toughened.
- Access – the floor, the lift, whether the unit fits up the stairwell, and how easy it is to reach the window from inside.
The quote is in writing, with the tasks, quantities and prices. You can get a rough idea from photos through our photo estimate, but the exact price comes after the site visit, because the unit is ordered to measurements taken on site. There is no set price for the hardware: an adjustment is one thing and a new part another, so that price is also in the quote after the site visit.
What a glazing unit is
A glazing unit – often called a double glazing unit – is two or three panes of glass joined into one piece. Around the edges there is a spacer frame between them, and the unit is hermetically sealed: between the panes there is a closed gap filled with dry air or an inert gas such as argon. The spacer contains a material that absorbs any remaining moisture.
In the window, the unit sits in the sash or, in fixed sections, directly in the frame. It is held in by glazing beads, which on PVC windows are on the room side. Each section of the window has its own unit, so in a window with several sections only the damaged one needs replacing.

When replacing just the glazing unit is enough
If the frame and the sash are sound and the hardware works, you do not need a new window. The glazing unit alone is replaced in three cases.
Misting between the panes
Mist or droplets on the inner faces of the glass that cannot be wiped off from either the room or the outside mean that the unit's seal has failed and moist air has got in between the panes. The unit cannot be cleaned inside, so the fix is a new glazing unit, while the frame and the sash stay.
Not all misting is a fault. If the glass mists up on the room side, the cause is humid air in the room, and airing helps: new windows are airtight, so moisture from cooking, bathing and breathing no longer escapes through gaps. Condensation only on the reveals around the frame is a sign that the installation joint should be checked.
Cracked or broken glass
A cracked pane cannot be replaced on its own on site: the unit is sealed as one piece, so a new unit is ordered – the same as the old one or a better one. If the glass is broken, do not open the sash, so that no pieces fall out.
A warmer, quieter or safer window
A glazing unit can also be replaced when it is not damaged but you want a different one – for example with low-e or laminated glass, or triple instead of double. The new unit has to fit the profile: the thickness a profile can take is limited, and a triple unit is thicker and heavier than a double one. Whether it will fit, and whether the sash and the hinges can carry it, we check at the site visit.
What kind of glazing unit you can order
- Double – two panes and one gap.
- Triple – three panes and two gaps. It is thicker and heavier, so the first thing to check is whether it fits the profile.
- With low-e glass – a thin, almost invisible coating that reflects part of the heat radiation back into the room.
- With laminated glass – two panes bonded with a clear interlayer. If it breaks, the pieces stay stuck to the interlayer, and with an acoustic interlayer it also helps against noise.
- With toughened glass – stronger against impact, and if it breaks it shatters into small pieces with blunt edges.
- With panes of different thickness – this also helps against noise.
- With frosted or patterned glass – for a bathroom, or where you do not want people to see in.
Which of these makes sense for your window depends on what you want to improve – warmth, quiet or safety – and on the profile. We settle it at the site visit and put it in the quote.
How a glazing unit is replaced
- Site visit and measuring. On site we measure the unit and its thickness, look at the profile, the sash and the hardware, and agree what the new unit should be. After the visit you get a written quote.
- Manufacture. The unit is made to measure, so some time passes between the site visit and the replacement; the date is in the quote.
- Removing the beads. The glazing beads that hold the unit are taken out carefully, so that they can go back afterwards.
- Taking out the old unit.
- Fitting the new one. The unit sits on glazing packers, which carry the weight of the glass to the sash frame and keep the sash square, so that it does not drop.
- Putting the beads back.
- Checking. The sash should open and lock easily – and, if it is tilt-and-turn, tilt as well; if needed, the hardware is adjusted.
The frame, the hardware and the reveals stay untouched, so replacing a glazing unit involves no skim coating or painting around the window.
Replacing the hardware on PVC windows
The hardware covers the hinges, the tilt-and-turn mechanism, the handle and the locking points along the edge of the sash and on the frame. It needs repairing or replacing when:
- the sash has dropped and its bottom edge rubs on the frame;
- the sash does not lock, or only locks if you push it;
- the handle is loose, hard to turn or sticks;
- the sash does not tilt, or tilts only with difficulty;
- there is a draught along the closed sash even though the glass is sound.
Adjustment often helps. The screws on the hinges raise the sash or move it sideways, and the locking cams along its edge set how firmly it presses on the seals. A handle that wobbles sometimes just needs tightening: its screws are under the cover at its base. If a part is worn or broken, only that part is replaced – the handle, a hinge or the mechanism – and worn seals can be replaced too. For very old profiles, parts are sometimes no longer available, and then it is worth comparing the repair with a new window.
The price for repairing or replacing the hardware on PVC windows is set after the site visit, because it depends on whether an adjustment is enough or a new part is needed. Adjusting the sashes and the hardware is also part of our window installation.

When the whole window is replaced
- The frame or the sashes are rotten, cracked or warped, and the sash no longer closes onto its seals. Then neither a new glazing unit nor adjustment helps.
- The profiles are very old. Old wooden windows with single panes in two sashes were not made for glazing units.
- You want a different sash layout or a different size of opening. We do not widen openings in load-bearing walls and panels without a structural engineer's opinion.
- There are several problems at once – misted units, worn hardware and a draught around the frame. Then compare the repair with a new window.
In a home renovation, the windows are replaced before skim coating and painting, because removing the old ones damages the reveals, which are then formed again – as we also say on our window installation page. The differences between profiles are in the article PVC, aluminium or wooden windows, and how reveals are skim coated and painted in the article on skim coating and painting.

What a new window costs on our price list
| Item | Price | Includes |
|---|---|---|
| Supply and fitting of external windows | €370.43 per m² | labour and materials |
| Window replacement + fitting | €375.80 each | labour |
| Removing a window | €134.21 each | labour |
| Finishing window reveals | €18.79 per lin. m | labour |
| Skim coat + paint around windows | €13.42 per lin. m | labour |
| Supply and laying of external window sills | €42.95 per lin. m | labour and materials |
Example: a 2.00 × 1.50 m window, i.e. 3 m², replaced with a new one that we supply. The reveals – the two sides and the top – come to 1.50 + 1.50 + 2.00 = 5 linear metres.
- The new window: 3 m² × €370.43 = €1,111.29 including materials.
- Removing the old one: €134.21 for labour.
- Finishing the reveals: 5 lin. m × €18.79 = €93.95 for labour.
Labour comes to €134.21 + €93.95 = €228.16, and the window with materials to €1,111.29; the total is €1,339.45. If the reveals are skim coated and painted again, add 5 lin. m × €13.42 = €67.10 for labour, and a new external sill across the width of the window is 2 lin. m × €42.95 = €85.90 including materials – with these, the total is €1,492.45. ‘Window replacement + fitting’ is €375.80 each for labour, not including the window itself, which is priced separately. Which item applies to your window is settled at the site visit.
Replacing a glazing unit with us starts at €150 per window, and the frame, the hardware and the reveals stay. If you are also thinking of glazing your balcony, there is a calculation in the article on balcony conversion.
What to check before you call us
A few minutes at the window make the site visit and the quote more precise:
- Where the moisture is – between the panes, on the room side or on the reveals.
- Which sections are affected – the sashes or the fixed sections – and how many units there are.
- How the sash works: open it, tilt it and lock it. Does it rub, does it stick, does the handle wobble?
- Where the draught comes from. Close the sash on a sheet of paper: if the paper pulls out without effort, the sash is not pressing on the seal at that point.
- The frame – are there rotten, cracked or warped spots?
- Access – the floor, the lift, any bars or furniture in front of the window.
Take photos of the window from inside and outside, close up and from a distance, and send them to us through the photo estimate. What else to check on the windows in a new home is in our new apartment handover checklist.
Frequently asked questions
Why has my glazing unit misted up inside?
If the mist is between the panes, the unit's seal has failed and moist air has got into the gap. The unit cannot be cleaned inside, so it is replaced, while the frame and the sash stay. If the glass mists up on the room side, the cause is humidity in the room, and airing helps.
Can just the glazing unit be replaced?
Yes, if the frame and the sash are sound and the hardware works. The new unit is made to the measurements of the old one and has to fit the profile. In a window with several sections, only the damaged unit is replaced.
How long does the replacement take?
The unit is made to measure, so the replacement takes two visits: measuring at the site visit and fitting the new unit. The fitting date is in the quote.
Does the old frame stay?
Yes. Only the glazing beads that hold the unit are taken off, and they go back once the new one is in. The frame, the sash, the hardware and the reveals stay.
Can a double glazing unit be replaced with a triple one?
Only if the triple unit fits the profile and the sash and the hinges can carry its greater weight. We check this at the site visit. If it does not fit, the options are a double unit with low-e glass or a new window.
How much does replacing the hardware on PVC windows cost?
The price is set after the site visit: an adjustment is often enough, and sometimes a new handle, hinge or mechanism is needed. The amount is in the written quote.
What is the warranty?
Our warranty is in writing, with a certificate: 24 months on the work. The profiles, glazing units and hardware carry the manufacturer's warranty, and we are responsible for the fitting – as our window installation page also says.
If your glazing unit has misted up or cracked, or a sash does not close properly, book a free site visit or call +359 888 802 618. We reply to enquiries within 3–4 hours, and the quote is in writing – with the tasks, quantities and prices. If the replacement is part of a larger renovation, see also interior renovation costs. For contracts signed by 31 December 2026, the whole quote – labour and the materials we supply – is 10% off. The RemontS brand has been working since 2019, with a full-time team and over 180 completed projects, in Sofia and up to 80 km around it.
More articles
All articles
Windows and doors6 min read
PVC, aluminium or wood: which windows should you choose? Pros and cons
Choosing your window and door frames is one of the most important decisions when renovating or building a home, because windows and doors play a key role in comfort, energy efficiency and the look of the property. Good-quality frames not only improve thermal insulation, saving on heating and cooling costs, but also improve security…
Read
Flooring10 min read
Screed and self-levelling screed: cost per m² and which to use
Labour per m² for standard and self-levelling screed by thickness, when to use each, and a worked example for a 20 m² room in two scenarios.
Read
Process13 min read
Concrete repair cost: €60 per m² and how it is done
Concrete repair with us costs €60 per m², and the exact amount depends on how deep the damage goes, the reinforcement, the area and access. Where concrete breaks down, how it is repaired and when an engineer comes first.
Read